Vacuum coating equipment of glass to how clean is clean

Vacuum coating equipment of glass to how clean is clean

I can only simple answer you clean the basic process. Water glass vacuum coating machine on the glass surface, row brush, roller, roller, roller, roller, squeezing water, drying, water spray for tap water or water mixing tank, the former two roller is water tap water (or there is a potion of tap water), 3, 4, water is ionized water purity above 15 ohms, best drying part pay attention to the air filter, air quality of more than ten entrants for the best. Usually pay attention to the cleaning rod, 2 times a week, best wipes with acetone.
Coated glass to glass the freshness of demanding, generally best for 7 days, can't be used for more than 15 days generally. As for how to clean! Or buy a coating special cleaning machine as well. Don't handle; Membrane layer bonding force is bad; It's easy to escape.

Vacuum coating vendors would vacuum coating technology

Vacuum coating vendors would vacuum coating technology

Vacuum coating technology in the application of plastic products is the most widespread. Plastic has easy molding, low cost, light weight, no corrosion and other characteristics, widely used plastic products, but because of its disadvantages restricted the expand application, such as not beautiful, easy to aging, poor poor mechanical properties, heat resistance, bibulous rate is higher. Through the application of vacuum coating technology, plastic surface metallization, combine organic materials and inorganic materials, greatly improved its physical and chemical properties. The vacuum coating equipment, vacuum coating machine optimal point in
A, improve beautiful, smooth surface, the metallic color, adornment sex is greatly increased;
Second, improve the surface hardness, the original plastic surface than metal soft and vulnerable, through vacuum coating, hardness and wear resistance increase greatly;
Third, improve the weatherability, general plastic in the outdoor aging fast, the main reason is caused by ultraviolet irradiation and after plating aluminum, aluminum with ultraviolet the strongest reflection, therefore, weatherability is greatly increased;
Fourth, reduce water absorption, the larger the number of coating, the less pinhole, bibulous rate is lower, product is not easy to deformation, improve the heat resistance;
Five, make plastic surface conductivity;
Six, easy to clean, no dust.

Vacuum coating machine the principle of magnetron sputtering coated glass production line

Vacuum coating machine the principle of magnetron sputtering coated glass production line

The principle of magnetron sputtering coated glass production line, using the float glass in high vacuum ion sputtering deposition to the surface of glass, metal and metal oxide coated glass. Metal and metal oxide using the optical diffraction principle to produce various color coated glass, colour is rich and colorful, solid membrane layer. And have very go...od heat insulation effect. At present, China's large and medium-sized cities of tall building glass curtain wall use most is the introduction of Germany or the United States offline coated glass production lines.
One well-known domestic coated glass manufacturer in the 1990 s, the introduction of Germany's large magnetron sputtering coated glass production line, the production control system adopted Opto22 products, this system has been very stable, the system hardware is very reliable, seldom buy spare parts, in order to expand production capacity, the company decided to, for the modification of the production line system is still adopted in the process of transformation of Opto22 Ethernet control products. The content of the transformation is the sputtering chamber to realize the control of the new, the sputtering by circulating cooling water, outdoor, when conditions have been met in proportion to the sputtering indoor ventilation into the setting of the process gas, by controlling the sputtering power supply of the power supply, power and current of float glass surface coating.
Because the original system running under the ms-dos operating system, in order to maintain normal production factory, do not do temporarily, but in order to and match the original system, choose a variety of new programming control scheme, namely single sputtering chamber control, multiple sputtering chamber linkage. To realize the flexible control.

Vacuum coating machine leak detection operation

Vacuum coating machine leak detection operation

Vacuum coating machine mainly refers to a kind of need to be done under high vacuum coating, including many types, including vacuum ion evaporation, magnetron sputtering, MBE molecular beam epitaxy. To introduce specific operation method of leak detecting operation of vacuum coating machine, hope you can help to you.
1, the helium mass spectrometer leak detector HLT 560 connected to the front of the... pumps on the leak detection.
2, start, leak detector, leak detector began to draw the gases in the sealed cavity, and at the same time start the coating equipment pump group.
3, in the internal of vacuum coating machine down to a certain amount of time, such as below the 0.5 mbar, helium gas gush in doubt there is leakage, or move to the part of the check standard maintenance. At this moment need someone to observe the leakage rate of leak detector of the indicated value change. When leakage rate increase or severe leakage rate values change over time, points out that funnelled location in time, and marking.
4, all suspects testing is complete, close the leak detector, stop coating machine pumps and open the coating machine, will detect the funnelled processing (such as replacement of sealing ring, cleaning, etc.). After processing is completed, according to Syria step before check it again, until all funnelled cleared, leak detection process is complete.

The use of glass coating machine

The use of glass coating machine

A, the operation of electric control cabinet
1. Open water pump, air source.
2. Open the total power.
3. Maintain open pump, vacuum gauge, vacuum gauge files V1 position, wait for after its value is less than 10, then into the next operation. Takes about 5 minutes.
4. Open mechanical pump, to pump, turbomolecular pump power supply, start, vacuum gauge switch in position to V2, smoke until less than 2, about 20 minutes.
5. Observe the turbo molecular pump reading after 250, take out, to be opened before the machine and high valve to continue pumping air into vacuum state, vacuum reaches a certain degree to drive on the right side of the high vacuum header, observe the vacuum degree. Vacuum arrived at 2 x 10-3 after to open gun power supply.
Second, the electron gun power operation
1. The total power supply.
2. At the same time open Ⅰ gun control and gun control Ⅱ power: according to the electron gun control Ⅰ power supply, delay switch, delay, power and to protect the light, three minutes after the time delay and protect the lights went out, if the back door is not closed or malfunction with the current relay, protect will normally on.
3. High pressure, high pressure will reach more than 10 kv, adjust the beam to about 200 ma, screen grid for 20 v / 100 ma, the filament current is 1.2 A, deflection current oscillation between 1 ~ 1.7.
Third, shutdown sequence
1. Close the high vacuum header, molecular pump.
2. Stay molecular pump to 50, in turn off valve, former level, high mechanical pump, this time takes about 40 minutes.
3. Below 50, to maintain the pump.

The use of glass coating machine

The use of glass coating machine

A, the operation of electric control cabinet
1. Open water pump, air source.
2. Open the total power.
3. Maintain open pump, vacuum gauge, vacuum gauge files V1 position, wait for after its value is less than 10, then into the next operation. Takes about 5 minutes.
4. Open mechanical pump, to pump, turbomolecular pump power supply, start, vacuum gauge switch in position to V2, smoke until less than 2, about 20 minutes.
5. Observe the turbo molecular pump reading after 250, take out, to be opened before the machine and high valve to continue pumping air into vacuum state, vacuum reaches a certain degree to drive on the right side of the high vacuum header, observe the vacuum degree. Vacuum arrived at 2 x 10-3 after to open gun power supply.
Second, the electron gun power operation
1. The total power supply.
2. At the same time open Ⅰ gun control and gun control Ⅱ power: according to the electron gun control Ⅰ power supply, delay switch, delay, power and to protect the light, three minutes after the time delay and protect the lights went out, if the back door is not closed or malfunction with the current relay, protect will normally on.
3. High pressure, high pressure will reach more than 10 kv, adjust the beam to about 200 ma, screen grid for 20 v / 100 ma, the filament current is 1.2 A, deflection current oscillation between 1 ~ 1.7.
Third, shutdown sequence
1. Close the high vacuum header, molecular pump.
2. Stay molecular pump to 50, in turn off valve, former level, high mechanical pump, this time takes about 40 minutes.
3. Below 50, to maintain the pump.

The benefits of glass coating

The benefits of glass coating

Sunlight control coated glass is the most main is to shade insulation, according to its physical properties, also called a glass of hot reflex plated film by magnetron sputtering on normal transparent glass vacuum coating machine on the plating layer or multilayer film, here we referred to as the reflective glass.
Reflective glass, compared to the normal transparent glass on the reflection performance of solar energy..., reflective glass, for the first time is 4.3 times higher than common glass, the reflection of the second reflection is 3.1 times higher, 3.6 times higher than that of total reflection on the; On shading coefficient, reflective glass than ordinary glass is 0.18, the coefficient is less, shading effect will be better, greatly reduce the solar radiation and heat transmission; In visible on the reflection and transmission of reflective glass reflecting increased by 20% ~ 20% than common glass, transmission decreased by 55% ~ 55%, and has a good shading performance; On the heat transfer coefficient, reflection than ordinary glass reduced 0.4 W (m2. K), has good heat insulation performance.
Use its good shading and heat insulation performance, can greatly reduce spending on indoor cooling and heat preservation, is a very good energy saving products, and can be through the different metal or metal compounds as target material, to produce different colors of reflective film plating, common color is dark brown, gray, golden brown, tan, brown yellow, coral, through different supplement, achieve illuminative effect, namely beautiful and saving energy.

Vacuum coating equipment glass lens coating knowledge

Vacuum coating equipment glass lens coating knowledge

Basic knowledge of vacuum coating equipment glass lens coating, you know, there are no objects on the light reflection, this is the reason that we can see things. For the lens, in order to be able to make the light through the lens completely, in the film fully reflect the true nature of the situation, the best shot is through a variety of light completely. High-quality optical glass, which can reach 90% light transmittance

Above, the remaining light loss on the need of the lens surface coated film to compensate. Therefore, in the optical lens mainly antireflection coating plated also called AR coating. In order to meet various requirements, often require coated multilayer film. In order to improve scratch resistance of glass, the outermost layer tend to be high-hardness film. In the laboratory, modern technology can reach almost one hundred percent of light through. This is so because in actual use will be more or less affected by dust, dirt, etc. on the lens, making the reduction of light through the lens. Film in many ways, but also so several conventional methods.

Glass coating machine and its evaporation source

Glass coating machine and its evaporation source

Glass coating machine is mainly used for the production of coated glass after glass coating process to achieve no ordinary glass original features, better performance relative to the original glass, the price may be expensive. The main mode of production of coated glass currently have several: First, vacuum evaporation coating; the second is a vacuum magnetron sputtering; the third is the solution gel method; Fourth powder thermal spraying.
Glass vacuum evaporation coating machine, it can be used a lot of glass processing products, such as automotive glass, computer screen, mobile phone screens and other glass modules. The principle is the use of a vacuum glass coating machine production coated glass, according to its use of different energy sources evaporation coating system materials are different.

The importance of coating equipment for coating thickness distribution

The importance of coating equipment for coating thickness distribution

Vacuum coating electromechanical always want more evenly distributed coating equipment plating thickness on the workpiece, the better the deposition. When the total amount of metal deposited on the workpiece is the same, if the thickness is uneven, it will bring a lot of disadvantages:
(1) For the anodic coating, vacuum coating equipment can not stand at the expense of a thin ...coating of corrosion will first make the matrix rust. And a part of Corroded parts already failed, resulting in a waste of the coating is too thick at the metal. If it is to ensure the thinnest not rust, can only increase the average thickness, resulting in plating cost increases.

(2) to the cathode of the coating, vacuum coating equipment thin coatings at high porosity (see Part 10), it is easy to produce rust spots, and then increase the rust to form contiguous corrosion. Compared with the anodic coatings, cathodic corrosion coating thin place faster. For local seepage nitrogen, carburizing coating, easy to form thin at the hole, lose protection. If the thickness uniformity of the various parts of the porosity is not very different, the overall increase corrosion resistance. For example, the battery bright nickel plated steel rollers, housing (particularly by bottom place) coating is thin, even when washing and drying already starting small rust spots, yellowing, this should "the white" treatment, after rapid drying of water-soluble blocking agent.
(3) For the bright plating, vacuum coating equipment thin coating at the cathode current density due to small, so light leveling poor, affect the overall appearance.
(4) alloy electrodeposition, alloy composition is not the same at different thickness, or the appearance of uneven (such as imitation gold plating), and corrosion resistance are inconsistent or (such as zinc-nickel alloy).
(5) physical coating at different thicknesses, the mechanical properties (such as brittleness, internal stress, etc.) are not the same. If you would have to be plated after stamping molding machine processing, the coating is too thick at the often poor machining performance (peel, crack, powder off, etc.).
Terms of corrosion resistance, or appearance, machining performance perspective, both want to improve the uniformity of the coating thickness of vacuum coating equipment. For the size of the hard chrome plating, if the user requires no plating after grinding treatment, it is difficult to do; sometimes in order to ensure the thinnest reach the final size requirements, thickness uniformity is poor, have greatly increased the average thickness, which is in production are not uncommon. To make each part of the coating thickness on the workpiece as close as possible, we must understand the impact of thickness uniformity factor.

Glass coating, vacuum coating machine coating Notes

Glass coating, vacuum coating machine coating Notes

Automotive glass coating increasingly popular, but many people enjoy the convenience of just after the glass coating, maintenance coating film after the relevant considerations and has not been done, this effect is maintained for the coating is very unfavorable.

First, vacuum coating machine glass coating can be applied over the rearview mirror.

Because the mirror is not the wind, if the plating to allocate water glass drops then there will accumulate, thus affecting sight. Advanced car mirrors are hydrophilic glass. In fact, the general construction glass coating only the front windshield glass and other glass mirrors can also be construction but it is absolutely not the construction.

Second, anti-fog construction do not apply too thick.

Glass and glass coating agents typically used in conjunction with anti-fog, anti-fogging agent in glass at the time to pay attention not to apply too thick, too thick smear if they would not wipe clean. In addition, the duration of the anti-fogging agent with the weather, dry weather often duration, continuous rainy weather, then anti-fog effect is relatively short period of time, it is also important to note.

Third, posted proof membrane can still be coated.

Utility proof membrane is insulated privacy glass coating function is to increase the splash of the glass, these are two entirely different things, I do not know why anyone would think that the film will not be posted proof coating of. In fact, this is wrong, there is no proof membrane and coating affected. Proof membrane is usually attached to the glass inside, and coating agents and anti-fogging agent is generally used on the outside.

Fourth, do not rain or washing within four hours after the glass coating.

This is in order to better protect the car glass coating effect, rain or washing may affect the duration of the coating. And when coated glass has been cleaned, the coating process and will not stain the body, there is no need to wash after the film is completed. To avoid the rain, then simply choose the good weather to do a film on it.

Vacuum coating equipment and coated glass

Vacuum coating equipment and coated glass

Coated Glass (Reflective glass), also known as reflective glass. Coated glass is coated one or more layers of metal, alloy or metal compound film on the glass surface, to alter the optical properties of the glass, to meet certain requirements. Coated glass according to the different characteristics of the product, can be divided into the following categories: heat-reflective glass, Low-E glass, Low-E, con...ductive film glass.
Heat-reflective glass is usually coated on the glass surface layer or layers of thin films, such as chromium, titanium or stainless steel and other metals or compounds consisting of the product showed a rich color, appropriate for visible light transmittance, infrared has higher reflectance, the coated glass has a higher UV absorption rate, therefore, also known as solar control glass, mainly for building and glass curtain wall;
Low-E glass is coated on the glass surface of a multilayer thin-film of silver, copper or tin, or a compound consisting of a metal, the product has a high visible light transmittance, high infrared reflectivity, a good heat insulation performance, mainly used in construction and automotive, ships, and other transportation, due to poor film strength, are generally made using hollow glass; glass conductive film is a conductive film of indium tin oxide coated glass surface, etc., can be used for heating the glass defrost, defog and as liquid crystal displays..
Many coated glass production methods, the main vacuum magnetron sputtering, vacuum evaporation, chemical vapor deposition and sol - gel method. Magnetron sputter coated glass by magnetron sputtering techniques can be designed for producing a multilayer complex film system, a variety of colors can be coated on a white glass substrate, the film is preferably corrosion and wear resistance, is the production and use one of the largest product.

Glass coating machine and what are the difference between evaporation coating machine?

Glass coating machine and what are the difference between evaporation coating machine?

Vacuum evaporation coating machine sediment deposition and sputtering deposition coating, specific include many types, including vacuum ion evaporation coating machines, magnetron sputtering, MBE molecular beam epitaxy, sol gel method and so on.
Heating evaporation coating the surface of target components form groups of atoms, or ions by evaporation, and sedimentation in the substrate surface, through the film-forming process (scatter - island structure - the vagus structure - layered growth) form the membrane. Light coating machine
Composition uniformity: evaporation coating composition is not very easy to ensure uniformity, specific can control the above factors, but due to the limitation of principle, for not a single component coating of evaporation coating composition uniformity is not good.
Crystal to uniformity: 1, the lattice matching degree 2, 3 substrate temperature, evaporation rate
Glass coating machine fixed on the upper shelf motor reducer with as a power source, including the guide, ball screw and slide, roller, and nut ball screw end connected to the motor reducer, insert the other end of the bearing seat at the bottom of the frame body, slide by on the ball screw nut connections, sliding seat equipped with roller, guide rail is installed on the frame body, roller with connection on the guide rail, sliding seat has installed base, its internal opened a hole, with a roller roller bearing insert at one end of the install base hole, the adjusting nut threaded connections at the other end of the install base hole, between the roller bearing and the adjusting nut with elastomer, insurance top wire through the adjusting nut inserted in the installed base hole. The utility model adopts the ball screw drive, the glass when the coating is stable and ensure the smooth ball screw transmission, make glass coating no yan wade corrugated.

Glass coating machine used in the range

Glass coating machine used in the range

1, building hardware, sanitary hardware (water tap). The door. The door shake handshandle. Sanitary ware, locks, metal hinges, furniture, etc.
2, watchmaking: can be used for watchcase. Strap coating, crystal products. Vacuum evaporation coating machine
3, other hardware: leather hardware. Stainless steel tableware. Glass frame, cutting tools, moulds, etc.
4, large artifacts: automobile wheel hub, stainless steel plate. Signs. Sculpture, etc.
5, stainless steel pipe and plate (all types of surface). Splash control sputtering coating machine
6, furniture, lamps and lanterns, hotel appliances.
7, locks, handles, bathroom hardware, golf head, stainless steel tableware, blood and other hardware products of hard decoration film plating.
8, watch, strap, glasses, jewelry ornaments such as super wear-resistant decorative plating (gold and silver) nano film and film and nano laminated film.

The principle of vacuum coating machine vacuum drying equipment and process

The principle of vacuum coating machine vacuum drying equipment and process

Vacuum coating machine equipment vacuum drying process includes three processes. By the heat source to heat transfer to the material, make its heat and moisture vaporization, known as the heat transfer process. "Evaporation of moisture vapor migration to the drying room space, make the moisture vapor from the material surface and discharge drying chamber, the so-called material surface moisture vapor state mass transfer process.
Material internal moisture migration with liquid to the material surface, so that the surface evaporation, the so-called material internal moisture liquid mass transfer process. Visible, vacuum drying is accompanied by the three process and coordination, the coordination of good or bad, directly affect the quality of vacuum drying speed and its products.
Complete the heat and mass transfer process, the following three requirements must be met. Depending on the implementation of the heat transfer temperature difference between the heat source and material, provide materials with heating of the heat and moisture latent heat of vaporization, the so-called temperature condition. "Depend on the material surface and the moisture vapor pressure of drying chamber space to implement material moisture gas mass transfer, the so-called pressure (or vacuum) conditions, therefore must ensure that the moisture in the material on the surface of the steam pressure is higher than steam steam partial pressure of drying chamber space.
Depend on the material internal moisture moisture inside the material with the concentration of the liquid mass transfer, the so-called concentration condition. Optimization of the above three conditions and their combination can improve the quality of vacuum drying speed and its products.

Why to clean vacuum coating machine

Why to clean vacuum coating machine

In the vacuum coating machine using coating materials, coating, coating materials to do a simple surface cleaning can prolong the service life of coating machine. Because of various pollutants not only cannot obtain the required degree of vacuum, vacuum system can also affect the joint strength and sealing performance of vacuum components.
Common pollutants are:
1. The oil including processing, assembling, when operating the lubricants, cutting fluid, vacuum oil, etc.;
2. Water base class has operating hand sweat, blowing the water vapor, saliva, etc; Acid, alkali, salt substance when cleaning the residual, hand sweat, mineral water, etc.; And polishing residue and environmental dust in the air and other organisms.
Cleaning is the purpose of these contaminants in order to improve the working stability of vacuum coating machine, make work more smoothly.

The cause of the lens coating and methods

The cause of the lens coating and methods

Lens coating, lens, or glass lenses, lamp lens are need coating appearance. Lens coating in fact, the reason is very simple, because the object has reflection effect on the light, because a lot of problems on the lens on the combination of the lens is impossible to let all light completely through various angles in theory, the light transmittance can reach more than 90%, the remaining 10% will be reflected out, form a glare. So you need to coating.
Lens coating in 1968 a new generation of coating technologies have been developed, coating process can be cheap and standard, coating lens is becoming more and more popular. Lens coating method, there are many on the market at present the most widely as one of the most popular coating method, physical vacuum coating method.
The latest way of physical coating technology, such as vacuum vapor deposition, ion plating a variety of different forms. The coating strength and uniformity generally higher than that of chemical coating. The past chemical coating, relative pollution is big, can't multilayer film plating. The latest vacuum coating to replace the chemical coating.
General coating layer on the surface of the lens itself is colorless, transparent, not only through the lens of the light will be reflected back, reflective visible to form the human eyes. Coating lens, the lens of the light transmittance is lower, reflections on the surface of the lens is more serious, therefore, each different camera lens, must according to the material used in the lens and the degree of absorption of different colours, plating on the different characteristics of the coating, mutual collocation, can increase the light transmittance of lens combined, and make the lens of light transmittance equilibrium.

Vacuum coating equipment, magnetron sputtering coating equipment technology application

Vacuum coating equipment, magnetron sputtering coating equipment technology application

Evaporation, magnetron sputtering dual-use vertical decorative coating machine, mainly suitable for plastic, ceramic, glass, metal surface plating metal decorative coating. Due to the deposition chamber for vertical container, so it has all the advantages of horizontal coating machine, and weight of the larger, fragile plating pieces of card, more easily achieve automatic production line, the water is replacing traditional plating is more ideal of a new generation of vacuum coating equipment. This machine part plating products don't do bottom oil.
Vacuum coating equipment owner to characteristics with modified high vacuum exhaust system, quick pumping speed, high efficiency, energy-saving, noise reduction and prolong the service life of the pump; Implementation of evaporation, magnetron sputtering, automatic control, simple operation, reliable operation; The evaporation plating equipment, introduced application of new type of electrode, small contact resistance, and reliable; Magnetron sputtering coating material widely, all kinds of magnetic metal, alloy plating material; Compact structure, cover an area of an area small; Magnetic control, evaporation share two vertical artifacts, convenient operation, high efficiency.
(or a two-door evaporation, magnetron amphibious machine) vacuum coating equipment and technology, the company business scope vacuum engineering in various pump, valve, vacuum gauge, oil, grease, seal, vacuum coating material, coating, metal and alloy products.
Vacuum coating equipment failure diagnosis and elimination, old products. New type of plastic, metal, glass and other products surface treatment technology and technical research, and consulting services. New technology, new equipment, new technology of magnetic control development of the new company, evaporation multi-purpose coating machine, with advanced high vacuum extraction system and automatic control system, the pumping speed is fast, high efficiency, simple operation, reliable operation; Be uniform coating is wide, membrane layer, good adhesion, substrate temperature and other characteristics; Is a metal plating, alloy and compound membrane to equipment; Suitable for transparent film, translucent film plating, superhard film, shielding film, and some special functional membrane. Has been widely used in optics, electronics, communication, aviation and other fields.

Vacuum coating equipment glass lens coating knowledge

Vacuum coating equipment glass lens coating knowledge

Basic knowledge of vacuum coating equipment glass lens coating, you know, there are no objects on the light reflection, this is the reason that we can see things. For the lens, in order to be able to make the light through the lens completely, in the film fully reflect the true nature of the situation, the best shot is through a variety of light completely. High-quality optical glass, which can reach 90% light transmittance

Above, the remaining light loss on the need of the lens surface coated film to compensate. Therefore, in the optical lens mainly antireflection coating plated also called AR coating. In order to meet various requirements, often require coated multilayer film. In order to improve scratch resistance of glass, the outermost layer tend to be high-hardness film. In the laboratory, modern technology can reach almost one hundred percent of light through. This is so because in actual use will be more or less affected by dust, dirt, etc. on the lens, making the reduction of light through the lens. Film in many ways, but also so several conventional methods.

High efficiency and energy saving LOW - E coated glass production line

High efficiency and energy saving LOW - E coated glass production line

Low-e coated glass production line production of glass can not only heat insulation, and can block 70% of the infrared. Company technical personnel to open two different glass at the bottom of the infrared lamp. After a few minutes, the face of it there is not much difference between the two pieces of glass, its performance is very different: induction with the hand, common glass has been gradually hot hot, and the LOW - E glass next to it is always cold.
Low radiation (low-e) glass is vacuum sputtering, glass coating on the surface of multilayer coating made of different materials, including silver plating layer of high infrared optical reflection function, namely high block, silver coating under the bottom of the coating for tin oxide (SnO2) antireflective coating, to increase the light transmittance, silver coating deposition of nickel and chromium on the gold (NiCr) metal coating, to protect the function of silver plating, the top coating for tin oxide (SnO2) antireflective coating, main purpose is to protect the overall coating layer, to pay attention to by modern architecture glass high light transmittance, Low reflective rate, high block.
It is the first selection of building energy-saving materials. After use, can effectively reduce the loss of indoor heat outside are scattered in the summer also can cut off the outdoor objects by the sun gets hot after secondary radiation, so as to play to the purpose of saving energy and reducing consumption, the production line annual capacity of 4 million square meters, building energy consumption could save 20000 tons of standard coal each year only.