glass vaccum coating machine

2017年1月9日星期一

Vacuum coating equipment of glass to how clean is clean

I can only simple answer you clean the basic process. Water glass vacuum coating machine on the glass surface, row brush, roller, roller, roller, roller, squeezing water, drying, water spray for tap water or water mixing tank, the former two roller is water tap water (or there is a potion of tap water), 3, 4, water is ionized water purity above 15 ohms, best drying part pay attention to the air filter, air quality of more than ten entrants for the best. Usually pay attention to the cleaning rod, 2 times a week, best wipes with acetone.
Coated glass to glass the freshness of demanding, generally best for 7 days, can't be used for more than 15 days generally. As for how to clean! Or buy a coating special cleaning machine as well. Don't handle; Membrane layer bonding force is bad; It's easy to escape.

2016年12月29日星期四

Vacuum coating machine application scope is outlined

Vacuum coating machine widely applied optics, electronics, toys, building materials, hardware, watches, automobiles, home decorations, solar, integrated circuits and other industries.
Vacuum coating machine specific application scope is as follows:
1, in the application of hard coating, cutting tools, moulds and wear-resisting corrosion resistant parts, etc....
2, application in the field of optical thin film, coating, high anti film, cut-off filter, anti-counterfeiting film, etc.
3, in the application of protective coating: the blade of aircraft engine, automotive steel, heat sink, etc.
4, in the aspect of architectural glass applications: sun control film, low radiation glass, anti-fog dew and self-cleaning glass, etc.
5, applied in the field of information display, LCD, plasma screen, etc.
6, in the application of decorative accessories: following, atlas, spectacle frame, hardware, small adorn article, such as coating.
7, the application in the field of solar energy utilization, solar thermal collectors, solar cells, etc.
8, application: in the field of touch screen mobile phone, computer screen, MP4 and other digital products, etc.
9, in the application of the integrated circuit manufacturing: film resistor, film capacitors, film temperature sensor, etc.
10 and application in the field of electronic products: liquid crystal displays, LCD TV, MP4, car display, mobile phones, digital cameras and applause computer, etc.
11, in the field of information storage applications: magnetic information storage, magneto optical information storage, etc.

2016年12月26日星期一

Vacuum coating vendors would vacuum coating technology

Vacuum coating technology in the application of plastic products is the most widespread. Plastic has easy molding, low cost, light weight, no corrosion and other characteristics, widely used plastic products, but because of its disadvantages restricted the expand application, such as not beautiful, easy to aging, poor poor mechanical properties, heat resistance, bibulous rate is higher. Through the application of vacuum coating technology, plastic surface metallization, combine organic materials and inorganic materials, greatly improved its physical and chemical properties. The vacuum coating equipment, vacuum coating machine optimal point in
A, improve beautiful, smooth surface, the metallic color, adornment sex is greatly increased;
Second, improve the surface hardness, the original plastic surface than metal soft and vulnerable, through vacuum coating, hardness and wear resistance increase greatly;
Third, improve the weatherability, general plastic in the outdoor aging fast, the main reason is caused by ultraviolet irradiation and after plating aluminum, aluminum with ultraviolet the strongest reflection, therefore, weatherability is greatly increased;
Fourth, reduce water absorption, the larger the number of coating, the less pinhole, bibulous rate is lower, product is not easy to deformation, improve the heat resistance;
Five, make plastic surface conductivity;
Six, easy to clean, no dust.

2016年12月19日星期一

Vacuum coating machine the principle of magnetron sputtering coated glass production line

The principle of magnetron sputtering coated glass production line, using the float glass in high vacuum ion sputtering deposition to the surface of glass, metal and metal oxide coated glass. Metal and metal oxide using the optical diffraction principle to produce various color coated glass, colour is rich and colorful, solid membrane layer. And have very go...od heat insulation effect. At present, China's large and medium-sized cities of tall building glass curtain wall use most is the introduction of Germany or the United States offline coated glass production lines.
One well-known domestic coated glass manufacturer in the 1990 s, the introduction of Germany's large magnetron sputtering coated glass production line, the production control system adopted Opto22 products, this system has been very stable, the system hardware is very reliable, seldom buy spare parts, in order to expand production capacity, the company decided to, for the modification of the production line system is still adopted in the process of transformation of Opto22 Ethernet control products. The content of the transformation is the sputtering chamber to realize the control of the new, the sputtering by circulating cooling water, outdoor, when conditions have been met in proportion to the sputtering indoor ventilation into the setting of the process gas, by controlling the sputtering power supply of the power supply, power and current of float glass surface coating.
Because the original system running under the ms-dos operating system, in order to maintain normal production factory, do not do temporarily, but in order to and match the original system, choose a variety of new programming control scheme, namely single sputtering chamber control, multiple sputtering chamber linkage. To realize the flexible control.

2016年12月15日星期四

Vacuum coating machine leak detection operation

Vacuum coating machine mainly refers to a kind of need to be done under high vacuum coating, including many types, including vacuum ion evaporation, magnetron sputtering, MBE molecular beam epitaxy. To introduce specific operation method of leak detecting operation of vacuum coating machine, hope you can help to you.
1, the helium mass spectrometer leak detector HLT 560 connected to the front of the... pumps on the leak detection.
2, start, leak detector, leak detector began to draw the gases in the sealed cavity, and at the same time start the coating equipment pump group.
3, in the internal of vacuum coating machine down to a certain amount of time, such as below the 0.5 mbar, helium gas gush in doubt there is leakage, or move to the part of the check standard maintenance. At this moment need someone to observe the leakage rate of leak detector of the indicated value change. When leakage rate increase or severe leakage rate values change over time, points out that funnelled location in time, and marking.
4, all suspects testing is complete, close the leak detector, stop coating machine pumps and open the coating machine, will detect the funnelled processing (such as replacement of sealing ring, cleaning, etc.). After processing is completed, according to Syria step before check it again, until all funnelled cleared, leak detection process is complete.

2016年12月13日星期二

The use of glass coating machine

A, the operation of electric control cabinet
1. Open water pump, air source.
2. Open the total power.
3. Maintain open pump, vacuum gauge, vacuum gauge files V1 position, wait for after its value is less than 10, then into the next operation. Takes about 5 minutes.
4. Open mechanical pump, to pump, turbomolecular pump power supply, start, vacuum gauge switch in position to V2, smoke until less than 2, about 20 minutes.
5. Observe the turbo molecular pump reading after 250, take out, to be opened before the machine and high valve to continue pumping air into vacuum state, vacuum reaches a certain degree to drive on the right side of the high vacuum header, observe the vacuum degree. Vacuum arrived at 2 x 10-3 after to open gun power supply.
Second, the electron gun power operation
1. The total power supply.
2. At the same time open Ⅰ gun control and gun control Ⅱ power: according to the electron gun control Ⅰ power supply, delay switch, delay, power and to protect the light, three minutes after the time delay and protect the lights went out, if the back door is not closed or malfunction with the current relay, protect will normally on.
3. High pressure, high pressure will reach more than 10 kv, adjust the beam to about 200 ma, screen grid for 20 v / 100 ma, the filament current is 1.2 A, deflection current oscillation between 1 ~ 1.7.
Third, shutdown sequence
1. Close the high vacuum header, molecular pump.
2. Stay molecular pump to 50, in turn off valve, former level, high mechanical pump, this time takes about 40 minutes.
3. Below 50, to maintain the pump.

2016年12月7日星期三

The use of glass coating machine

2016年11月30日星期三

The benefits of glass coating

Sunlight control coated glass is the most main is to shade insulation, according to its physical properties, also called a glass of hot reflex plated film by magnetron sputtering on normal transparent glass vacuum coating machine on the plating layer or multilayer film, here we referred to as the reflective glass.
Reflective glass, compared to the normal transparent glass on the reflection performance of solar energy..., reflective glass, for the first time is 4.3 times higher than common glass, the reflection of the second reflection is 3.1 times higher, 3.6 times higher than that of total reflection on the; On shading coefficient, reflective glass than ordinary glass is 0.18, the coefficient is less, shading effect will be better, greatly reduce the solar radiation and heat transmission; In visible on the reflection and transmission of reflective glass reflecting increased by 20% ~ 20% than common glass, transmission decreased by 55% ~ 55%, and has a good shading performance; On the heat transfer coefficient, reflection than ordinary glass reduced 0.4 W (m2. K), has good heat insulation performance.
Use its good shading and heat insulation performance, can greatly reduce spending on indoor cooling and heat preservation, is a very good energy saving products, and can be through the different metal or metal compounds as target material, to produce different colors of reflective film plating, common color is dark brown, gray, golden brown, tan, brown yellow, coral, through different supplement, achieve illuminative effect, namely beautiful and saving energy.

2016年11月27日星期日

Vacuum coating equipment glass lens coating knowledge

Basic knowledge of vacuum coating equipment glass lens coating, you know, there are no objects on the light reflection, this is the reason that we can see things. For the lens, in order to be able to make the light through the lens completely, in the film fully reflect the true nature of the situation, the best shot is through a variety of light completely. High-quality optical glass, which can reach 90% light transmittance

Above, the remaining light loss on the need of the lens surface coated film to compensate. Therefore, in the optical lens mainly antireflection coating plated also called AR coating. In order to meet various requirements, often require coated multilayer film. In order to improve scratch resistance of glass, the outermost layer tend to be high-hardness film. In the laboratory, modern technology can reach almost one hundred percent of light through. This is so because in actual use will be more or less affected by dust, dirt, etc. on the lens, making the reduction of light through the lens. Film in many ways, but also so several conventional methods.

2016年11月22日星期二

Glass coating machine and its evaporation source

Glass coating machine is mainly used for the production of coated glass after glass coating process to achieve no ordinary glass original features, better performance relative to the original glass, the price may be expensive. The main mode of production of coated glass currently have several: First, vacuum evaporation coating; the second is a vacuum magnetron sputtering; the third is the solution gel method; Fourth powder thermal spraying.
Glass vacuum evaporation coating machine, it can be used a lot of glass processing products, such as automotive glass, computer screen, mobile phone screens and other glass modules. The principle is the use of a vacuum glass coating machine production coated glass, according to its use of different energy sources evaporation coating system materials are different.

2016年11月20日星期日

The importance of coating equipment for coating thickness distribution

Vacuum coating electromechanical always want more evenly distributed coating equipment plating thickness on the workpiece, the better the deposition. When the total amount of metal deposited on the workpiece is the same, if the thickness is uneven, it will bring a lot of disadvantages:
(1) For the anodic coating, vacuum coating equipment can not stand at the expense of a thin ...coating of corrosion will first make the matrix rust. And a part of Corroded parts already failed, resulting in a waste of the coating is too thick at the metal. If it is to ensure the thinnest not rust, can only increase the average thickness, resulting in plating cost increases.

(2) to the cathode of the coating, vacuum coating equipment thin coatings at high porosity (see Part 10), it is easy to produce rust spots, and then increase the rust to form contiguous corrosion. Compared with the anodic coatings, cathodic corrosion coating thin place faster. For local seepage nitrogen, carburizing coating, easy to form thin at the hole, lose protection. If the thickness uniformity of the various parts of the porosity is not very different, the overall increase corrosion resistance. For example, the battery bright nickel plated steel rollers, housing (particularly by bottom place) coating is thin, even when washing and drying already starting small rust spots, yellowing, this should "the white" treatment, after rapid drying of water-soluble blocking agent.
(3) For the bright plating, vacuum coating equipment thin coating at the cathode current density due to small, so light leveling poor, affect the overall appearance.
(4) alloy electrodeposition, alloy composition is not the same at different thickness, or the appearance of uneven (such as imitation gold plating), and corrosion resistance are inconsistent or (such as zinc-nickel alloy).
(5) physical coating at different thicknesses, the mechanical properties (such as brittleness, internal stress, etc.) are not the same. If you would have to be plated after stamping molding machine processing, the coating is too thick at the often poor machining performance (peel, crack, powder off, etc.).
Terms of corrosion resistance, or appearance, machining performance perspective, both want to improve the uniformity of the coating thickness of vacuum coating equipment. For the size of the hard chrome plating, if the user requires no plating after grinding treatment, it is difficult to do; sometimes in order to ensure the thinnest reach the final size requirements, thickness uniformity is poor, have greatly increased the average thickness, which is in production are not uncommon. To make each part of the coating thickness on the workpiece as close as possible, we must understand the impact of thickness uniformity factor.

2016年11月16日星期三

Glass coating, vacuum coating machine coating Notes

Automotive glass coating increasingly popular, but many people enjoy the convenience of just after the glass coating, maintenance coating film after the relevant considerations and has not been done, this effect is maintained for the coating is very unfavorable.

First, vacuum coating machine glass coating can be applied over the rearview mirror.

Because the mirror is not the wind, if the plating to allocate water glass drops then there will accumulate, thus affecting sight. Advanced car mirrors are hydrophilic glass. In fact, the general construction glass coating only the front windshield glass and other glass mirrors can also be construction but it is absolutely not the construction.

Second, anti-fog construction do not apply too thick.

Glass and glass coating agents typically used in conjunction with anti-fog, anti-fogging agent in glass at the time to pay attention not to apply too thick, too thick smear if they would not wipe clean. In addition, the duration of the anti-fogging agent with the weather, dry weather often duration, continuous rainy weather, then anti-fog effect is relatively short period of time, it is also important to note.

Third, posted proof membrane can still be coated.

Utility proof membrane is insulated privacy glass coating function is to increase the splash of the glass, these are two entirely different things, I do not know why anyone would think that the film will not be posted proof coating of. In fact, this is wrong, there is no proof membrane and coating affected. Proof membrane is usually attached to the glass inside, and coating agents and anti-fogging agent is generally used on the outside.

Fourth, do not rain or washing within four hours after the glass coating.

This is in order to better protect the car glass coating effect, rain or washing may affect the duration of the coating. And when coated glass has been cleaned, the coating process and will not stain the body, there is no need to wash after the film is completed. To avoid the rain, then simply choose the good weather to do a film on it.

2016年11月13日星期日

Vacuum coating equipment and coated glass

Coated Glass (Reflective glass), also known as reflective glass. Coated glass is coated one or more layers of metal, alloy or metal compound film on the glass surface, to alter the optical properties of the glass, to meet certain requirements. Coated glass according to the different characteristics of the product, can be divided into the following categories: heat-reflective glass, Low-E glass, Low-E, con...ductive film glass.
Heat-reflective glass is usually coated on the glass surface layer or layers of thin films, such as chromium, titanium or stainless steel and other metals or compounds consisting of the product showed a rich color, appropriate for visible light transmittance, infrared has higher reflectance, the coated glass has a higher UV absorption rate, therefore, also known as solar control glass, mainly for building and glass curtain wall;
Low-E glass is coated on the glass surface of a multilayer thin-film of silver, copper or tin, or a compound consisting of a metal, the product has a high visible light transmittance, high infrared reflectivity, a good heat insulation performance, mainly used in construction and automotive, ships, and other transportation, due to poor film strength, are generally made using hollow glass; glass conductive film is a conductive film of indium tin oxide coated glass surface, etc., can be used for heating the glass defrost, defog and as liquid crystal displays..
Many coated glass production methods, the main vacuum magnetron sputtering, vacuum evaporation, chemical vapor deposition and sol - gel method. Magnetron sputter coated glass by magnetron sputtering techniques can be designed for producing a multilayer complex film system, a variety of colors can be coated on a white glass substrate, the film is preferably corrosion and wear resistance, is the production and use one of the largest product.

2016年11月10日星期四

Methods and characteristics of coated glass

Vacuum evaporation coating machine coated glass is the glass surface plating layer or layers of metal, alloy or metallic compound film, so as to change the optical properties of glass, satisfy certain requirements.
Coated glass according to the different characteristics of the product, and can be divided into the following categories: open vertical single coating machine heat reflective glass, low-e glass (low-e), conductive film glass, etc. Heat reflective glass is generally in the glass surface layer or one multilayer plating such as chromium, titanium or stainless steel and other metals or their compounds consisting of thin film, make the product is rich color, have appropriate for visible light transmittance, has high reflectivity to the infrared, is higher for uv absorption rate, therefore, also known as sun glass control, mainly used for construction and glass curtain wall; Low emissivity glass is on the glass surface by multi-layer plating metals such as silver, copper or tin, or their compounds composed of membrane system, products have high transmittance of visible light, to have a high reflectivity of infrared ray, has good heat insulation performance, mainly used in buildings and vehicles such as cars, ships, due to poor film strength, are usually made of hollow glass to use; Conductive film glass is coated on the glass surface of indium tin oxide and other conductive films, can be used for the heating of the glass, defrosting and defogging and used as a liquid crystal display, etc.

2016年11月6日星期日

What functions can glass vacuum coating

What functions can glass vacuum coating

Glass vacuum coating compared with the vacuum evaporation coating machine, lamp coating machine has what function?
Glass vacuum coating:
Glass vacuum arc ion plating vendors would provide more than coating is evaporative coating device, using resistance heating method in the vacuum chamber, will be close to in the resistance wire on the wire, aluminium wire melting vaporization, the vaporization of metal molecules deposited on glass substrate, and obtain high reflectivity film, achieve the goal of glass mirror.
What is the distinguishing feature of glass vacuum coating?
Glass vacuum coating have: reasonable structure, uniform film, short work cycle, high production efficiency, as a mirror of good quality and large pumping speed, easy operation, low energy consumption, stable performance, etc.
Splash control sputter coating factory specializing in the production of glass vacuum coating, if necessary, can provide custom service, generally need to provide the following services:
Pa light extraction time
Minutes of installed total power
KW evaporation power

2016年11月2日星期三

Glass coating machine and what are the difference between evaporation coating machine?

Vacuum evaporation coating machine sediment deposition and sputtering deposition coating, specific include many types, including vacuum ion evaporation coating machines, magnetron sputtering, MBE molecular beam epitaxy, sol gel method and so on.
Heating evaporation coating the surface of target components form groups of atoms, or ions by evaporation, and sedimentation in the substrate surface, through the film-forming process (scatter - island structure - the vagus structure - layered growth) form the membrane. Light coating machine
Composition uniformity: evaporation coating composition is not very easy to ensure uniformity, specific can control the above factors, but due to the limitation of principle, for not a single component coating of evaporation coating composition uniformity is not good.
Crystal to uniformity: 1, the lattice matching degree 2, 3 substrate temperature, evaporation rate
Glass coating machine fixed on the upper shelf motor reducer with as a power source, including the guide, ball screw and slide, roller, and nut ball screw end connected to the motor reducer, insert the other end of the bearing seat at the bottom of the frame body, slide by on the ball screw nut connections, sliding seat equipped with roller, guide rail is installed on the frame body, roller with connection on the guide rail, sliding seat has installed base, its internal opened a hole, with a roller roller bearing insert at one end of the install base hole, the adjusting nut threaded connections at the other end of the install base hole, between the roller bearing and the adjusting nut with elastomer, insurance top wire through the adjusting nut inserted in the installed base hole. The utility model adopts the ball screw drive, the glass when the coating is stable and ensure the smooth ball screw transmission, make glass coating no yan wade corrugated.

2016年10月31日星期一

Glass coating machine used in the range

1, building hardware, sanitary hardware (water tap). The door. The door shake handshandle. Sanitary ware, locks, metal hinges, furniture, etc.
2, watchmaking: can be used for watchcase. Strap coating, crystal products. Vacuum evaporation coating machine
3, other hardware: leather hardware. Stainless steel tableware. Glass frame, cutting tools, moulds, etc.
4, large artifacts: automobile wheel hub, stainless steel plate. Signs. Sculpture, etc.
5, stainless steel pipe and plate (all types of surface). Splash control sputtering coating machine
6, furniture, lamps and lanterns, hotel appliances.
7, locks, handles, bathroom hardware, golf head, stainless steel tableware, blood and other hardware products of hard decoration film plating.
8, watch, strap, glasses, jewelry ornaments such as super wear-resistant decorative plating (gold and silver) nano film and film and nano laminated film.

2016年10月26日星期三

The principle of vacuum coating machine vacuum drying equipment and process

Vacuum coating machine equipment vacuum drying process includes three processes. By the heat source to heat transfer to the material, make its heat and moisture vaporization, known as the heat transfer process. "Evaporation of moisture vapor migration to the drying room space, make the moisture vapor from the material surface and discharge drying chamber, the so-called material surface moisture vapor state mass transfer process.
Material internal moisture migration with liquid to the material surface, so that the surface evaporation, the so-called material internal moisture liquid mass transfer process. Visible, vacuum drying is accompanied by the three process and coordination, the coordination of good or bad, directly affect the quality of vacuum drying speed and its products.
Complete the heat and mass transfer process, the following three requirements must be met. Depending on the implementation of the heat transfer temperature difference between the heat source and material, provide materials with heating of the heat and moisture latent heat of vaporization, the so-called temperature condition. "Depend on the material surface and the moisture vapor pressure of drying chamber space to implement material moisture gas mass transfer, the so-called pressure (or vacuum) conditions, therefore must ensure that the moisture in the material on the surface of the steam pressure is higher than steam steam partial pressure of drying chamber space.
Depend on the material internal moisture moisture inside the material with the concentration of the liquid mass transfer, the so-called concentration condition. Optimization of the above three conditions and their combination can improve the quality of vacuum drying speed and its products.

2016年10月24日星期一

Equipment whether good or bad determines the plating coating quality?

Equipment whether good or bad determines the plating coating quality? Coating machine is in accordance with the relevant control device of a certain technological requirements put, electroplating trough, chamber, vacuum plating, filtration equipment, power equipment, instrumentation, heating or cooling device parts together to realize the whole process of the process, with good equipment can improve the production efficiency and quality of coating products.
Vacuum plating production used in the production of raw materials and acid, alkali corrosive substances, equipment run in this kind of working environment for a long time won't be able to avoid the line from corrosion, and falling lubrication problem, over time the equipment stability decreased, when the power reaches a certain degree of coating is affected or even equipment to stop working.
Good equipment more durable and more stable: plating equipment suitable for metal, wood, cement, ceramic, plastic, ceramic, resin, acrylic, phosphorus, magnesium, and other materials, can be widely used in electrical appliances, toys, mobile phones, cars, computers, crafts, jewelry, furniture and other adornment industry, tools such as hard coating industry and so on.
Good vacuum coating equipment electroplating quality will be more high, for the same process, the system of the same film plating layer use time is more short, the composite material formed by coating in combination with stronger, brightness, uniform, dense, continuous, greatly reduce the cost.

2016年10月20日星期四

The principle of vacuum coating machine cooling system

Vacuum coating equipment the metal cover body by mounting holes and then fixed in the form of welding in the external walls of vacuum coating machine, for the cooling of the outer wall by strengthening circular groove formed channel, so that ensure the circulation of cooling, also avoid the phenomenon of blind Angle, effective to the rapid cooling of coating machine, reduces the temperature of the oil pump, to strengthen the cooling intensity, simple structure, safety and reliability etc, in the vacuum coating machine cooling case including the metal cover body is the cause of a number of an orderly, and the strengthening of concave circular groove, strengthening circular groove is described hemispherical or conical shape; It is to strengthen existing circular groove bottom sets with connection of vacuum coating machine for cooling of the outer wall mounting holes, described the metal cover body through the mounting hole and fixed in welding way outside the existing vacuum coating machine for cooling wall, it is between the outer wall of the metal cover body and stay cool through strengthening circular groove constitute circulation channel, the vacuum coating machine according to claim 1 circulating cooling system with cooling case, its characteristic is that it is the metal cover on the vertical and horizontal spacing between two referred to strengthening circular groove is 100-300 mm, the strengthening circular groove 12 _15mm deeply, as described in the thickness of the metal cover body is 2-5 _, the vacuum coating machine according to claim 1 circulating cooling system with cooling case, its characteristics is described in the strengthening of circular groove 24-136 - mm in diameter.
Vacuum coating machine mainly refers to in the case of high vacuum coating, has been widely used, the system of film especially widely, its production of thin film has been applied to various kinds of photoelectric system and optical instruments, digital camera. Binoculars, and used in automobile industry and other industries.

订阅：博文 (Atom)